While there are people who don’t liked fitted cars, stance cars are often placed for show because of their inability to handle all kind of roads. This doesn’t mean that the car is useless though. ‘Stanced cars for sale’ is not a rare sight. Some cars actually come in their stance form because of their ability to attract and look very sexy, yet they are not always about going off-road. These cars are ones to cruise around the city comfortably in, without a worry in the world.

They are cars that someone can take to the show and enjoy as people stare at all the hardware that you have installed in it. Some people prefer not to run the risk of ruining parts of the car because of the precariously low body positions of this car.

Stance cars are not always about putting the car so low that it cannot drive. It is all up to the owner. Stance cars for sale usually come with the preferences of the driver in mind, so that their height considerations are made. Show cars are available where the owner gets a very low car but doesn’t intend to drive it – only to have it taken to the show location on a truck or some other form of transportation. Some stance cars, however, allow for the ability to drive. These are the exceptions rather than the rule because most of the stance car owners prefer to have the form of their car over the drive capabilities. Many of the stance cars can be thought to be broken, or a mechanical disaster, but if you’re looking to have something different that highlights your uniqueness in your ability to drive, then a stance car is just what you need. Just make sure that you have the right roads in your area and the perfect height so that you can balance out the risk of damage with the fun in driving.

The post How to Stance Your Car appeared first on Cars One Love.

We are going to provide you with some tips that will be useful when you decide to return the original color of your car. So how can you remove Plasti-Dip from your car?

Apply several layers of Plasti-Dip during application

Several layers of plastic film will provide the best finish. And this will make the Plasti-Dip removal process much easier. When applying Plasti-Dip, it`s better to cover the surface with 2-5 layers to make it completely even. Each layer has to be dried for at least 40 minutes or even longer. After you have applied Plasti-Dip, don`t touch the surface for at least 4 hours. Don`t forget that it`s better to choose a day when you`re free. Light wind, low humidity and not much direct sunlight will suit the best. The temperature should be 65-70˚.

Grab plastic film and peel it off slowly

When you decide to remove the plasti dip film, try to pull it slowly in order not to damage the finish beneath. If you make Plasti-Dip come off too fast, this may cause tears, which will complicate the working process.

Rub plastic film with a textured cloth

You can use a microfiber or a terry cloth to remove the bits that are stuck in crevices. You`ll have to make some endeavor. So, begin scrubbing. This method will help you to get rid of Plasti-Dip small pieces.

Mild solvent

If you don`t manage to remove plasti dip film with a rag, try to use some gentle solvent as a Plasti-Dip remover. These may be Goo Gone, bug-and-tar remover or even tire shine spray.

You can also use WD-40, if you remove plasti dip far from the calipers or brakes. Spray it onto the product and leave for about 5 minutes. Afterwards, try to wipe Plasti-Dip off with a cloth. But be sure to remove any WD-40 residues.

Big guns in case nothing else works

If all else fails, you can try to remove plasti dip with stronger solvents. These may be brake cleaner, diluted paint thinner or aircraft remover. They are not going to make any harm to the finish. But use these solvents only in a well-ventilated place where there is no risk of ignition.

If nothing is efficient, a blast with a heat gun or with a pressure washer may provide assistance.

We hope, these 5 secrets will be useful for you and you won`t face any problems while removing Plasti-Dip.

The post Manual: How to remove Plasti dip appeared first on Cars One Love.

Use a trouble code scan tool- It is the safest and simplest way to rest a check engine light. You may purchase a scan tool from your local auto spare parts shop. The OBDIII scan tool is used to recover stored trouble codes, clear trouble codes, and also turn off the check engine light. It is only applicable to 1996 and newer vehicle models.

Disconnecting the Battery – The method works for many cars. This process requires power in order to save the recollection of the error codes it is picking up to set off a check engine light. You should leave the lights on and drain all bits of electricity by pressing the horn for some minutes. They are complications with this method. Disconnecting the battery will cause your radio not to work and for vehicles that use theft protected radio systems, the radio may think that the car has been stolen. Once you have reset the check engine lights, you may experience troubles with reactivating the radio. Reactivating the radio may require you to obtain the code from the manufacturer of the vehicle. You may also have problems of vehicle lock-down for cars that have a factory fitted alarm system.

In case you do not know or don’t want to do the fixing by yourself, you can take the car or vehicle to a professional to reset it. In auto repair shops, the professionals will use the check engine light code to reset tripped codes. They mostly perform it free of charge if you ask them in a nice way.

In conclusion, using an auto scan tool to reset the check engine light is the best way. It clears the error code without causing any disturbance to the connection of the battery. It also does not require any technical expertise and is easy to carry out. The whole fixing procedure doesn’t take a long time as it can take up to even less than ten minutes. The prices of the automotive scan tools have reduced and have become more affordable. It is advisable for any driver to have a scan tool so as to reset the check engine light efficiently in a short time.

The post How to reset the check engine light appeared first on Cars One Love.

To get a better understanding of how to plasti dip rims, it is important to start by explaining how the process works. Plasti dip is a process that involves the dipping of parts in molten rubber which subsequently cools down to form a coating that will uniformly cover the parts. The color of the rubber solution will naturally become the new color visible on the new parts. It is important to understand that the rubber coating will not in any way affect the performance of the part that is coated. It merely acts as an aesthetic effect that will enhance the looks.

How to Plasti Dip Rims Instruction

1. Clean or wash away the dust, dirt, rust and etc from the desired area wait till dry.
2. Use newpapers or poker card at the rim side in order to cover from spraying on unwanted area.
3. Shake the Plasti Dip Baloon for 1~2 mins in order to mix up perfectly.
4. Finger on spray head at the distances of 15~25cm. Spray thin layer on the area.
5. Repeat spraying thin layer for 6~8 times and wait for 3~5mins for every layer to dry.
6. Remove the newpapers or poker card after paint is fully dry.

Plasti dip removing

The good news is that you can easily remove the plasti dip when you decide that you no longer need it. To understand how to remove plasti dip, you need to start by looking at the application process. Considering that plasti dip is a rubber coating method, the basic process involved in removing the coating should naturally involve the peeling of the rubber to reinstate the coated part to its original state. To remove the plasti dip from an item, you can either find a way of peeling out the rubber coating manually or by use of a specialized machine that is designed to do the job professionally.

Why Plasti Dip Your Car

There are many things that you can use plasti dip on. You can either use them on rims, side-mirrors, the tires, bumpers and fenders among many other things. This simply means that you can change the appearance of your vehicle significantly using the dips. Even more interesting is that fact that you can choose from a variety of colors. You decide on the colors to use because the plasti dip comes in as many shades of colors as you can actually mix. Because the process does not cause a permanent change, many car owners have the liberty to try out all sorts of colors as long as they are willing to sample. With this kind of flexibility, one has the option to turn out in different themes for as long as they are willing to pay the cost of plasti dip.

The process has actually become so popular because it works in a very short time. Naturally, many people who have had their vehicles plasti dipped attest to the fact that it can possibly happen in as little as an hour. As long as the item has cooled down and the item is ready for handling, the car owner can easily drive off and enjoy the grand attraction they intended to create with the new changes. Although this style is basically common in small cars, it is also possible to have the same.

The post How to Plasti Dip Rims appeared first on Cars One Love.

• Go through your permit book to familiarize yourself with road rules that you might have forgotten. The books also have safe driving tips are very beneficial for any driver.
• Avoid panicking or getting nervous. Don’t think too much when driving, ensure you relax as relaxing enables you as a driver to avoid making mistakes and adjust quickly if anything goes wrong. You can listen to soft music to calm you down.
• Ensure that you get enough sleep- When you are sleepy or too tired, you will not be able to see things clearly through your windscreen. You have to sleep well for a good driving experience.
• Ensure that your field of vision is clear- Remove anything that is in front of the rear window as it tends to reduce the field of vision and cause distractions.
• Practice often- Practice makes perfect; practicing how to drive in different driving scenarios, and situations increase your driving prowess.
• Focus- Always pay close attention to the traffic and check the mirror frequently. Avoid texting or picking calls as you might be distracted. Also, always try to figure out what other drivers are trying to do, this will reduce hesitation while driving hence avoiding accidents.
• Always know who are driving with- If you are with a person who is likely to be a great distraction to you while driving, let them sit at the back and refrain from talking to you.
• Have confidence while driving- Do not hesitate while driving; hesitating can make you take rough moves that may pose dangerous to you and others.
• Avoid over speeding- Despite being late for an appointment, job, or interview; your safety is of utmost importance. Drive safely at the required speeds.
• Allow large vehicles to pass- Trucks and other large vehicles accelerate quickly but are very hard to stop. Before completing a pass, ensure that you have seen the truck in the rearview mirror.
• Avoid switching lanes when in the middle of a junction- Time your entry into the intersection to avoid blocking once the light turns red.
• When turning or changing lanes, notify other drivers early enough to enable them take the suitable action.
• Know your way- It is always advisable for a driver to know the routes and roads around them. It will minimize distractions when you will be worrying about the lane to get into or when to take a turn.
• The tips above will enable you to be a great driver. Just remember always to be alert, have focus and confidence, and practice often.

The post How to be a better driver appeared first on Cars One Love.